Tips For Preventing Slips And Falls In The Bath

Slips And Falls Bath time it should be quite enjoyment and bonding time between the baby and parent but it may turn into a slipping and falling accident. Keeping babies and toddlers extra wiggly, safety precautions should be taken. A non-slip mat in the tub, shallow water, and being close to the child at all times should help. The bathroom floor must be dry to avoid slipping and falling. These easy steps make bath time safe and enjoyable for your little one.

Use A Non-Slip Bath Mat Slips And Falls

Actually, putting a non-slip bath mat at the bottom of the tub would probably be one of the easiest ways to avoid slips. These mats give hold so that your baby or toddler wouldn’t slide around in the water. There are bath mats with suction cups that stick on the floor of the tub, giving your child more sturdiness while he sits or stands.

• Put a good non-slip suction cup bath mat into the tub for your child to give them some firm grip.

• Secure it so that the mat does not slide during bath time.

Never Leave Your Child Unattended

This is the first golden rule of bath safety: never leave your baby or toddler alone in the bath, even for a few seconds. As the toddler slips or falls, the time is crucial; therefore, sitting by your baby when bathing him or her seems to be the best strategy.

• Keeping close proximity to your kid during bathing enables you be ever-responsive to any slips.

• Be sure to wrap your baby in a soft towel and take them with you if you need to leave.

Keep The water level low

You don’t need to fill the tub up really full of water for bath time. In fact, a couple of inches of water is plenty of water for babies and toddlers. Shallow water reduces chances of drowning if baby slips, as well as makes it easier to move them without added danger of too much water.

• Fill your bathtub with just a couple of inches of water for drowning prevention purposes.

• Shallow water enables easy support and movement while bathing your child.

Use A Bath Seat

For the infant learning to sit up, a bath seat can help a little bit. Still, though, keep in mind that a bath seat does not replace supervision and vigilance at bathtime. In fact, a child using a bath seat can easily slide out or tip over, so stay right by their side, no matter what.

• Bath seat for babies learning to sit, but may never replace supervision.

• Ensure the bath seat is stable and properly secured to avoid tipping.

Keep The Floor Dry Slips And Falls

Slips and falls may also happen during entry and exit from the tub. Install a non-slip mat or towel on the bathroom floor to absorb water. This will prevent wetting the floor and your child shall have a safer place to hold onto.

• Lay a towel or a non-slip mat outside your bathtub in order to prevent slipping entering into and out of the bathtub.

• Immediately clean up all spills on the flooring of your bathroom.

Teach Your Child To Sit During Bath Time

As your child becomes more active and curious, he would like to stand up or just get up in the bath. You wish you could indulge that sense of curiosity, but it is safest to make bath time a sitting experience for your child. Let your little one know that it keeps him safe, and do praise when he sits.

• You should encourage your child to sit while bathing to avoid slipping.

• Give your child positive reinforcement when they will remain seated and obey safety advice.

Ensure Bath Toys Are Available

Some baths are so fun to have with toys; however, some baths may be the cause of your child stretching or leaning over, which might lead to falling. You can keep bath toys nearby so that they don’t have to reach around much to get the toys. You can use toys that float into the water and your child can easily grab to play with.

• Bath toys that can float can also engage him while he bathes without having him stretch or lean.

• Toys should be available within an arm’s reach so as to avoid unnecessary movement.

Check The Temperature Of The Water

This has nothing to do with a topple, but very warm water can indeed scald a young child’s skin, and a baby will flinch in an involuntary reaction as he drifts off to sleep in the bath. So, check the temperature first on your elbow or wrist before you put him into it. It ought to feel just warm enough, but not too hot.

• Use the wrist or elbow to test the water to ensure it’s not too hot but also comfortably warm.

• Avoid fluctuations in water temperature during the bathing session and thus prevent burns.

Conclusion

That is nothing more magical than bath time, can be a great bonding experience, but safety always comes first. Using non-slip mats, keeping the water level low, and being close to your child’s arm’s reach while in the bathtub can all enhance safety. Remembering these tips will make bath time safe as well as enjoyable for both you and your little one.

FAQ’s